Connect with us

Ultrasonic Sensor

Discussion in 'Sensors and Actuators' started by himanshu0128, Apr 10, 2016.

Scroll to continue with content
  1. himanshu0128


    Mar 21, 2016
    please tell why/how a square pulse transmitted by an ultrasonic receiver is converted to sine wave at the receivers end..
  2. Anon_LG


    Jun 24, 2014
    The incoming amplitude of the reflected wave is distorted as the sensor will detect all of the ultrasonic wave that is input. The ping sent out is reflected at very slightly different time off of different materials, and may travel through areas of lower and higher density, leading to slower and faster travel times respectively. The distribution is concentrated on the median, leading to a bell shape or positive sine half like waveform.
  3. himanshu0128


    Mar 21, 2016
    ty ..that was actually helpful
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day