Connect with us

ultiboard

Discussion in 'Electronic Design' started by e k, Sep 1, 2004.

Scroll to continue with content
  1. e k

    e k Guest

    hello

    is here anybody that can say where i can download a crack of keygen for
    ultiboard 2001

    thanks
    eelco
     
  2. Don Pearce

    Don Pearce Guest

    You can buy a crack from Ultiboard. I don't think they charge very
    much for them.

    d

    Pearce Consulting
    http://www.pearce.uk.com
     
  3. Rich Grise

    Rich Grise Guest

    No, sorry, we're all sworn to secrecy.
     
  4. R.Lewis

    R.Lewis Guest

    I am not disagreeing but if you want really professional s***e you must use
    Cadstar as the yardstick.
    What do you recommend for general use?
     
  5. john jardine

    john jardine Guest

    Ultiboard is shite. Wouldn't use it even if the makers gave me a free copy
    and cash. Once cracked a 'Protel98', 30 minutes later knew that that was
    also shite and ... wouldn't use it even if the makers gave me a free copy
    and cash.
     
  6. john jardine

    john jardine Guest

    To be honest I've little use for a PCB prog'. The paying stuff I do gets
    subbed out to a veritable artist who (believe it or not!) uses that Zuken
    Cadstar. He's been at it for 30 years so the result is high quality despite
    the progs he's using.
    The stuff I do myself is trivial bits and bobs like prototype adapter PCBs
    to get SM stuff into DIL sockets etc . I use an early, version3 'EasyPC'
    prog which is just about useable for drawing diagrams and is able to
    manually lay down tracks without too much trouble. I loathe and detest the
    programme but less so than all the others I've tried (and try) :). The
    EasyPc people have since had many years to hopefully develop the product, so
    it would be my first port-of-call if I needed to get serious.
    regards
    john
     
  7. Chaos Master

    Chaos Master Guest

    Schematic/PCB: I like EAGLE. http://www.cadsoft.de
    Schematic only: gEDA (I use it under Windows). I haven't yet made PCB to work
    under Windows

    Terry Pinnell (sp?) made a 'ECAD LIST' of electronics CAD software:

    http://www.terrypin.dial.pipex.com/ECADList.html


    --
    Chaos Master®, posting from Brazil. REPLY TO GROUP!
    "People told me I can't dress like a fairy.
    I say, I'm in a rock band and I can do what the hell I want!"
    -- Amy Lee

    Note: please don't give me TinyURL addresses.

    NP on foobar2k: Evanescence - [Fallen #06] Tourniquet [4:38]
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-