Connect with us

UK h/w and s/w consultant needed

Discussion in 'Electronic Design' started by David Collier, Nov 30, 2006.

Scroll to continue with content
  1. UK h/w and s/w consultant needed

    A customer has a need for someone to look over a bit of 'tronics and
    software they're working on for them.

    The kit is a USB2 "network", including a couple of hubs, and some
    USB<->serial interfaces.

    Basically the Serial port part of it seems not to work.

    So the key skills are electronics to the level of checking datasheets,
    500M bit tracking on PCBs, and then s/w skills to work with the XP
    drivers and debug the problem.

    Fun huh?

    If you aren't into this yourselves, but know a mate who is, that would
    be a big service.

    email me a tiny email, with URL and minimal CV if you must at

    and I'll forward them

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day