Connect with us

Tv set fell on the floor

Discussion in 'Electronic Repair' started by Franc Zabkar, Jun 20, 2006.

Scroll to continue with content
  1. Franc Zabkar

    Franc Zabkar Guest

    It would cost more than the TV is worth.

    - Franc Zabkar
  2. Ken G.

    Ken G. Guest

    How much would a laser assembly or possibly a whole cdrw drive cost for
    a RCA cdrw121 cd recorder

  3. Ken G.

    Ken G. Guest

    The tv is fine . How much for the cdrw drive ?
  4. M Berger

    M Berger Guest

    Why don't you call a Philips part distributor and ask?
  5. Franc Zabkar

    Franc Zabkar Guest

    I don't know about the USA, but here in Australia the cost of laser
    assemblies is ridiculous. You will nearly always pay more for the
    laser than you will for the entire drive or the entire unit, assuming
    you can buy a laser assembly at all. If you are lucky and the original
    CDRW drive is an IDE type, then you may be able to replace it with a
    standard PC type, dimensional differences notwithstanding. I've
    managed to do this with my DVDR.

    - Franc Zabkar
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day