Connect with us

TV problem

Discussion in 'Electronic Repair' started by Every Strangers Eyes, Sep 12, 2007.

Scroll to continue with content
  1. Hi

    My Panasonic TV model number TX-W28R4DP has just gone wrong.

    This happened suddenly without warning as the TV was switched on.

    The screen has scrolled up so that there is a black bar at the bottom
    and shimmering black lines through the rest of the picture, see picture

    Does anyone have any advice please?

    Thanks in advance.

  2. AJ

    AJ Guest

    Appears to be a problem in the vertical frame deflection circuitry. Possibly
    the output ic, associated capacitors and other components. Post actual
    diagnostics you have done or off it to a qualified service facility.
  3. Not done any diagnostics as I'm a complete novice when it comes to TV's.

    I guess it'll have to be scrapped as the cost of repairs will probably
    out weigh the cost of a new TV.

    Thanks for the help though.
  4. Maybe not. This is probably a rather minor and easily repaired problem.

    --- sam | Sci.Electronics.Repair FAQ:
    Repair | Main Table of Contents:
    +Lasers | Sam's Laser FAQ:
    | Mirror Sites:

    Important: Anything sent to the email address in the message header above is
    ignored unless my full name AND either lasers or electronics is included in the
    subject line. Or, you can contact me via the Feedback Form in the FAQs.
  5. Meat Plow

    Meat Plow Guest

    And the repair solution is...............?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day