Connect with us

TV power Fault.

Discussion in 'Troubleshooting and Repair' started by baceyeb, Jan 14, 2017.

Scroll to continue with content
  1. baceyeb

    baceyeb

    9
    1
    Aug 27, 2016
    Please I a working on a Grundig and Amstrad TV both 20" the fault is the same when you put it on the standby light comes on but it doesn't switch on, you can here the switching sound. I have change the FET transistors and the power ic's of both but still not switching the model for the Grundig is T55-830text made in Austria. The Amstrad is model 20"TX Silver made in Turchia pleas kindly help.
    Also Mr. Adams thank you
     
  2. shrtrnd

    shrtrnd

    3,734
    478
    Jan 15, 2010
    if you supply us with the Model Number of the sets, someone here might be able to find a schematic and
    try to give you some advice about what to check. The model number is usually listed on the identification
    plate on the back of the television set.
     
  3. baceyeb

    baceyeb

    9
    1
    Aug 27, 2016
    Thanks I have put it there.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-