Connect with us

Tv modulator interface

Discussion in 'Electronic Repair' started by Ambrogio, Nov 10, 2003.

Scroll to continue with content
  1. Ambrogio

    Ambrogio Guest

    Good Day :
    I need the bit protocol to control the Sharp TV Modulator through the
    I2C serial BUS.
    The module has its own PLL that has to be programmed using the I2C.
    The module type is E225x or E235x produced by Sharp.
    Thank you for any help.
    Ambrogio
    Varese, North Italy
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-