Connect with us

Turntable Pre Amp

Discussion in 'Electronic Basics' started by Bill Harvey, Nov 23, 2003.

Scroll to continue with content
  1. Bill Harvey

    Bill Harvey Guest


    I need to build a pre amp to enable me to plug my Record Player Turnrtable
    into the Line In of my computer in order to convert some Vinyl to MP3.

    Anyone point me to a schematic?

  2. Lord Garth

    Lord Garth Guest

    Here you go....
  3. Larry Green

    Larry Green Guest

    Do you have a 'tape out' on your stereo amplifier? If so do what I do when I
    want to convert my vinyl to .wav, .cda or mp3 etc. This is assuming of
    course that you have 'phono in' on that amp and can actually play the
    records in the first place.

    I have a lead that connects to the stereo amp at the 'tape out' RCA sockets
    at one end and the other end is terminated in a 3.5mm stereo jack plug that
    plugs into the 'line in' socket on my sound card. This works well for me
    when used in conjunction with 'Wave Repair' software that allows me to
    remove all the clicks, pops and scratches on the old vinyl.

  4. Baphomet

    Baphomet Guest scroll to bottom "universal preamplfier"

    You might have to either add and or adjust the equalization to conform to
    R.I.A.A. but these should give you a start.
  5. tempus fugit

    tempus fugit Guest

    check on the binaries NG - there's a schem there posted for someone who
    asked the same question
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day