Connect with us

Turbolift handles don't work.

Discussion in 'General Electronics Discussion' started by x32, Apr 1, 2014.

Scroll to continue with content
  1. x32

    x32

    2
    0
    Apr 1, 2014
    Ok, what I really need is advice on how to wire what I'm sure is a simple circuit. I thought it would be easy but I have almost zero electronics knowledge. It really is for a turbolift, I run Starbase Studios in Oklahoma City and these are for lights in the handles. www.starbasestudios.net

    I have 6 led lights and 6 switches. I need to be able to turn on all 6 lights with any switch. Shouldn't that be simple?
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,497
    2,838
    Jan 21, 2010
    Place the switches in parallel so that each one individually provides a path between the power source and the LEDs.

    Remember that the LEDs, depending on how they are wired will need at least 1, and possibly 6 resistors.
     
  3. x32

    x32

    2
    0
    Apr 1, 2014
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-