Connect with us

Tuning slugs

Discussion in 'Electronic Repair' started by [email protected], Dec 24, 2005.

Scroll to continue with content
  1. Guest

    I need some 1/4 " tuning slugs for an old Hammarlund HX-50. They are
    just a threaded screw with a hex hole in the middle - you know the ones

    I am talkin about. I got at least one thats all crumbled. I'm not sure

    of the material but I would guess Powder Iron. Please tell me where I
    can get off of the internet.

    I can also use some 1/4" x 2 1/2" coilforms with the slugs and I will
    wind my own transformers. I need to add the 160m option to my HX-50.
    Why Hammarlund didn't just make 160m standard will always be a mystery
    to me.


    NEO-Later
    N9NEO
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-