trying to find supplier of cogs for Jaycar motor

[Phil in Melbourne]

Hi all,

I have ordered some medium power motors from Electus. Cat number YM2707

I need the little cogs that go on the end of these motors just like the ones
pictured here

http://www.netbay.com.au/~haxby/UniBoard.JPG

The shaft diameter is 2mm.

Does anyone know where to get these cogs? Is there a better word than cogs?
I need about 100 of them.

-Phil

 

[rob]

Hi all,

I have ordered some medium power motors from Electus. Cat number YM2707

I need the little cogs that go on the end of these motors just like the
ones pictured here

http://www.netbay.com.au/~haxby/UniBoard.JPG

The shaft diameter is 2mm.

Does anyone know where to get these cogs? Is there a better word than
cogs? I need about 100 of them.

-Phil

I think they are called spur gears.

I'm sure I've seen them amongst all the neat doodads on the shelves at
http://www.discounthobbies.com.au/ in Perth. Similar hobby place in
Melbourne may have them.

http://www.minibearings.com.au/products_index.html may have them through
Stock Parts - might be costly.

good luck

 

[Phil in Melbourne]

Thanks, will try em both.

-P

I think they are called spur gears.

I'm sure I've seen them amongst all the neat doodads on the shelves at
http://www.discounthobbies.com.au/ in Perth. Similar hobby place in
Melbourne may have them.

http://www.minibearings.com.au/products_index.html may have them through
Stock Parts - might be costly.

good luck

 

[Phil in Melbourne]

http://www.minibearings.com.au/products_index.html may have them through

I am now tearing my hair out as I need 70 units by next week.

Minibearings.com don't have them. They have about a billion other gears but
they don't have these ones.

Any other leads???

 

[APR]

cam art/craft and technology
197 Blackburn Road
Mount Waverley
VIC Australia 3149

Tel: Australia 03 9802 4200 International: +61 3 9802 4200
Fax: Australia 03 9887 9806 International: +61 3 9887 9806
email: [email protected]


http://www.camartech.com.au/ress/newproducts.php3?section=newscience

 

[APR]

Click on the URL below and go half way down the page.............

 

[Phil in Melbourne]

Thanks APR, you are a legend. Just ordered some!!

-Phil

 

[Tim Polmear]

Hi all,

I have ordered some medium power motors from Electus. Cat number YM2707

I need the little cogs that go on the end of these motors just like the ones
pictured here

http://www.netbay.com.au/~haxby/UniBoard.JPG

The shaft diameter is 2mm.

Does anyone know where to get these cogs? Is there a better word than cogs?
I need about 100 of them.

-Phil

Wiltronics have them.


____________________________________________________
"I like to be organised. A place for everything. And everything all over the place."