Connect with us

TROUBLE with DSC PC1555 ALARM WITH A PC5508Z KEYPAD

Discussion in 'Microcontrollers, Programming and IoT' started by madbomber, Jun 22, 2011.

  1. madbomber

    madbomber

    1
    0
    Jun 22, 2011
    I did a factory reset on my PC1555 alarm and got it into the programming mode. set the time and got rid of the TLM problem but did not exit programming mode. left it for a couple of hours and when I got back the trouble light was on but none of the keys will respond. I tried (factory) resetting but keys still do not respond? Can anyone help me:( I'm at a loss as to what to do.
     
  2. Gr3mlin

    Gr3mlin

    20
    0
    Jul 29, 2011
    hay man, didnt expect to see an alarm Q in here.
    Lucky im an alarm tech!
    So its a PC1555, now, TLM is telephone line monitoring, you would have had to turn that off in programming..
    The trouble light, can also indicate your location in programming. If the panel is awaiting data entry, that sort of thing.
    BUT, you saying, none of the key's responded leads me to believe that its not that.
    How are you performing the factory reset?
     
  3. Gr3mlin

    Gr3mlin

    20
    0
    Jul 29, 2011
    another question, where did you get the model number from?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-