Maker Pro
Maker Pro

TRIAC L4004F91

ENGINEER 21

Dec 31, 2013
3
Joined
Dec 31, 2013
Messages
3
Hi did Bill manage to acquire a L4004F91 TRIAC if so let me know where i can also acquire one,many thanks vince
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
This is one of those cases where you are far better to post in the original thread.

However here is a link to the datasheet.

It sounds like a logic level triac (0.2V to 2V gate voltage) rated at 400V 4A, capable of being triggered in all 4 quadrants with a max gate current of 25mA.

This would probably work.
 

ENGINEER 21

Dec 31, 2013
3
Joined
Dec 31, 2013
Messages
3
TRIAC L404

Many thanks for the information Steve, new to the site and learning the electronics field so go easy on me, will look for similar spec with the information on data sheet. Happy new year to all. vince
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
I gave a link to a 70c replacement. It's also a pretty common part, and somewhat more rugged than the original part.
 

ENGINEER 21

Dec 31, 2013
3
Joined
Dec 31, 2013
Messages
3
TRIAC L4004

Hi from vince not sure of the link to the part number you gave as 70c is this on the teccor site or another site, many thanks
 
Top