Connect with us

Treadmill control board check and repair

Discussion in 'Troubleshooting and Repair' started by MarshalEbuka1230, Jul 18, 2019.

Scroll to continue with content
  1. MarshalEbuka1230

    MarshalEbuka1230

    1
    0
    Jul 18, 2019
    Hello, I need help to ascertain what component in the control board needs to be attended to.

    My treadmill displays an E02 error code.
    Stating the cause to be Over-Current protection.
    Advices to check or change control board.

    Can I fix this problem without changing the board entirely?
     

    Attached Files:

  2. Martaine2005

    Martaine2005

    2,773
    745
    May 12, 2015
    Hello, and so do we....
    You will need to provide lots more information about your particular treadmill including close-up, clear photos of the control board.
    The most basic form of over current protection is a fuse. Perhaps your control board has a fuse for the output drive to the motor.

    Martin
     
    Last edited: Jul 18, 2019
  3. 73's de Edd

    73's de Edd

    2,872
    1,216
    Aug 21, 2015
    " My treadmill ". . . . . . . .

    Now we have ONLY 26 known BRANDS and a combined 32 different YEARS of their being manufactured and their combined 11,648 different MODELS.
    And here I am, additionally worrying about where I am going to ask someone to help me identify what PART I need to to fix my CAR.
     
    Tha fios agaibh and Martaine2005 like this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-