Connect with us

Treadmill board controller issue Urgent!!

Discussion in 'Troubleshooting and Repair' started by KamelKDR, Feb 11, 2021.

Scroll to continue with content
  1. KamelKDR

    KamelKDR

    3
    0
    Feb 11, 2021
    Hello, Every one everybody,
    I have a Tai-Zhi controller treadmill board (Tz-7009) that is facing error E1. The motor turns for one second only (5 degrees ) and then stops and e1 will be shown within 10 seconds, the Mosfet are good also the motor, speed sensor is ok.
    I am wondering if someone has already encountered this problem before and get the solution, Please provide with.

    Thanks in advance
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-