Connect with us

translate mosfet ads (advanced_curtice2) model to spice model

Discussion in 'Electronic Design' started by duese, Feb 16, 2007.

Scroll to continue with content
  1. duese

    duese Guest

    I need to simulate an nmosfet in spice but the manufacturer website
    only provides an ads model (Advanced curtice quadratic). does anyone
    have a table that shows the correlation of the parameters or even a
    translation tool.

    thanks, daniel.
  2. What's the MOSFET's part number?
  3. Jim Thompson

    Jim Thompson Guest

    That's a GaAs FET model, a rather old one... it's called Level=1 in
    PSpice and there are models all the way up to Level=6.

    ==>> It's GaAs FET, NOT MOSFET.

    ...Jim Thompson
  4. duese

    duese Guest

    OK, thanks a lot! But I still need to put the ATF54143 specific
    parameters into the model because I can't find it in the list? I'm
    using a simpler freeware version called SuperSpice.

    (I thought MOS is MetalOxideSemiconductor or is it MetalOxideSilicon?)
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day