Connect with us

Transistor pulsing high PS with battery charge and UPS 5 Volt

Discussion in 'Electronic Basics' started by Scott Wiper, Jun 14, 2004.

Scroll to continue with content
  1. Scott Wiper

    Scott Wiper Guest

    I have this design after getting two books on switching dc to dc converters
    I have come up with this:

    http://www.travel-net.com/~swiper/switch.gif

    You see I heed 2.5A at 5VDC.

    My Question is;

    Am I going a abit stupid with the inductors L1 and L2?
    (I have ones with 41 turns of 18 wire guage on ferris cores. They messured
    10 mH)

    Will This blow up the caps on the emitters on both 2N6284's?

    I am getting stumpted.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-