Maker Pro
Maker Pro

Transformerless psu calculations

Status
Not open for further replies.

jriofrio

Mar 18, 2018
7
Joined
Mar 18, 2018
Messages
7
Hello
I'm looking for information on the calculations needed to get specific output voltage and amps in a transformerless psu.
I have seen many examples but without the theory in how to calculate the values of the components to be use.

Does anybody could show how is done, or direct me to the right place, please.

Use these values as an example in the calculations please (if you are going to explain it yourself )
Input: 120vac at 15 amps
Output: 18vdc at 3 amps
I know is not recommended to have high current with transformerless psu. What is the limit?
Please use the max amps output value that you know is secured .

Thank you
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
Hello
I'm looking for information on the calculations needed to get specific output voltage and amps in a transformerless psu.
I have seen many examples but without the theory in how to calculate the values of the components to be use.

Does anybody could show how is done, or direct me to the right place, please.

Use these values as an example in the calculations please (if you are going to explain it yourself )
Input: 120vac at 15 amps
Output: 18vdc at 3 amps
I know is not recommended to have high current with transformerless psu. What is the limit?
Please use the max amps output value that you know is secured .

Thank you


since it is obvious you have no idea what you are doing
I am closing this thread for safety reasons
 
Status
Not open for further replies.
Top