Absolutely, give me a sec I will have a look and send the detail
M Moolay Dec 19, 2020 21 Joined Dec 19, 2020 Messages 21 Dec 19, 2020 #21 Absolutely, give me a sec I will have a look and send the detail
M Moolay Dec 19, 2020 21 Joined Dec 19, 2020 Messages 21 Dec 19, 2020 #22 Ok the Yellow rectangle X2 is the following MPX275vacX2 474-K40/110/56 CQC 250VAC Is it the Big Black Can only one of them or the smaller cans? The Big Black Can is 180uf 400V
Ok the Yellow rectangle X2 is the following MPX275vacX2 474-K40/110/56 CQC 250VAC Is it the Big Black Can only one of them or the smaller cans? The Big Black Can is 180uf 400V
M Moolay Dec 19, 2020 21 Joined Dec 19, 2020 Messages 21 Dec 19, 2020 #23 The smaller black can one of them is 3.3uf 400v
Martaine2005 May 12, 2015 4,951 Joined May 12, 2015 Messages 4,951 Dec 19, 2020 #24 Great, just confirming that they're rated for and above 230v. Martin
M Moolay Dec 19, 2020 21 Joined Dec 19, 2020 Messages 21 Dec 19, 2020 #27 Martin Before I plug the next one in, is there anything i should look for thats different? I dont want to blow up anything else.?
Martin Before I plug the next one in, is there anything i should look for thats different? I dont want to blow up anything else.?
Martaine2005 May 12, 2015 4,951 Joined May 12, 2015 Messages 4,951 Dec 19, 2020 #28 No, not at all. It should be plug in and work normally as designed. We’ll wait for your update. Martin
No, not at all. It should be plug in and work normally as designed. We’ll wait for your update. Martin
B Bluejets Oct 5, 2014 6,927 Joined Oct 5, 2014 Messages 6,927 Dec 19, 2020 #29 Can only see black remains on the switcher (#14) mounted on the heatsink. Probably just a dodgy unit.
Can only see black remains on the switcher (#14) mounted on the heatsink. Probably just a dodgy unit.
73's de Edd Aug 21, 2015 3,622 Joined Aug 21, 2015 Messages 3,622 Dec 20, 2020 #30 On your pointing finger of post # 9 photo. . . . which is apparently being of post # 14 power supply's top side. Now, can we get a blowup of # 14 on its FOIL side, that is magged up enough for VALID evaluation viewing ?
On your pointing finger of post # 9 photo. . . . which is apparently being of post # 14 power supply's top side. Now, can we get a blowup of # 14 on its FOIL side, that is magged up enough for VALID evaluation viewing ?