Connect with us

Transducer

Discussion in 'Boat Electronics' started by Andy, Jul 2, 2004.

Scroll to continue with content
  1. Andy

    Andy Guest

    I was wondering if I would be able to use the transducer for the depth gauge
    as the transducer for a fish finder? and is it possable to run it to both?


    Andy
     
  2. Scuba Steve

    Scuba Steve Guest

    Depends on the frequency of the transducers. If they are both 200mhz or
    50mhz, no as you wil get interference and bad readings. You can however run
    them both if one was a 200mhz and the other a 50mhz.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-