Maker Pro
Maker Pro

Toshiba LCD Module

  • Thread starter Arthur (A.J.) Jones
  • Start date
A

Arthur (A.J.) Jones

Jan 1, 1970
0
I recently picked up a Toshiba LCD module at a local surplus store. I
plan to experiment with drawing to it using the parallel port and some
self-written software, but I have yet to find any useful info online.
Any info about the device (data sheet, pin outs, original use, etc.)
would be greatly appreciated. Here is what I have found out from the
thing itself:

The screen measures 9-1/8" x 4-1/8"
On the underside, a sticker has the following info:

TOSHIBA
TLC-364A-122
G6E

In addition, printed on the board itself is "TOSHIBA ZQ8036-304". There
are 11 chips visible, with 2 rows of 5 of "Toshiba T7777" and one
"Toshiba T6961B". The external connector has 12 pins.

I have found out the following online: Toshiba considers the T6961B
controller to be obsolete, and it seems that they do not have the data
sheet for it online. They have the data sheet for the T6963C, the
successor to the T6961B, but how similar they are is unknown to me.
Additionally, Toshiba does not have data sheets for its LCD modules
available online.

Once again, any help will be greatly appreciated. If this is off-topic
here, I apologies; a pointer to a relevant group would be a great help
to this newbie.
 
Top