Connect with us

Toshiba DLP.

Discussion in 'Electronic Repair' started by Dani, Nov 30, 2007.

Scroll to continue with content
  1. Dani

    Dani Guest

    Model # 52HM84, it takes six, or seven tries to get it on, then it's
    fine. Ballast, or light engine?
    Don't have any parts to try in this model. Thanks, Dani.
     
  2. Jamie

    Jamie Guest

    Try a new lamp.
    when the lamp gets bad, the starting current is to low and
    in many units the ballast will time out and give up how ever, if
    you keep at it and not wait for the lamp electrodes to cool down
    from each attempt, at some point it will fire. but this is only
    an indication that one day, it'll never work.
     
  3. Meat Plow

    Meat Plow Guest

    Could be either the ballast or light.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-