Connect with us

Toshiba CF35F40 vertical out of sync

Discussion in 'Troubleshooting and Repair' started by Humberto Zarate, Oct 6, 2009.

Scroll to continue with content
  1. Humberto Zarate

    Humberto Zarate

    1
    0
    Oct 5, 2009
    On Toshiba TV model CF35F40 I have replaced 503 KHz crystal resonator (23153721) and vertical output Q301 (TA8427K), I got back the vertical raster but it is out of sync. I tried to find a control to put it in sync but I did not found any. How can I adjust the vertical frequency? Anybody could help?

    Humberto Zarate
     
  2. tvtek

    tvtek

    11
    0
    Sep 14, 2009
    I suspect you have a bad jungle IC. Its the IC the crystal resonator is linked to. The resonator is used for horizontal not vertical.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-