Connect with us

Toshiba CF3062K pix goes snowy then clear

Discussion in 'Electronic Repair' started by Art, Oct 15, 2004.

Scroll to continue with content
  1. Art

    Art Guest

    Either flakey solder connections or caps in the video processor circuits.
    May need to scope the signal to findout just were you are loosing it.
     
  2. Bradley26

    Bradley26 Guest

    Hi

    On this 30" Toshiba, just over 10 years old, its suddenly started going
    snowy on the video

    its like 90% snow, not 100%

    On any input, rf, video 1,2,3,4 or SVideo, if you push on the tv from any
    direction or tap it with a fist, the pix goes clear again. the audio
    remains the whole time.

    Anyone seen this problem?? Ive opened it, checked around the tuner section,
    its dusty but everything is tight.

    thanks
     
  3. Me

    Me Guest

    Connections inside the tuner can. You can get PTS to rebuild it or attempt
    to do it yourself. Look at the grounds to the shield first under high
    magnification and a bright light.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-