Connect with us

Toshiba CE3211 shows in B&W only

Discussion in 'Electronic Repair' started by Guest, Jun 9, 2005.

Scroll to continue with content
  1. Guest

    Guest Guest

    Hi. Got a Toshiba CE3211 tv in today. Storm hit it. Runs fine except for 2
    things. 1 -- shows in B&W only, except menu, which is in color. 2 -- sides
    bowed in a bit, like a pincushion problem will appear. I have gone over it
    for solder joints, shorted diodes, etc. Not to fill a page with what I have
    checked, but curious if anyone has seen this before.

    Cheers, Danny
     
  2. John-Del

    John-Del Guest

    If it has a TA series jungle, they are susceptible to chroma loss after
    lightning hits (Zenith uses these). It might also solve the geometry
    problem.

    John
     
  3. Guest

    Guest Guest

    Cool, thanks. The TA1291N chip then. I haven't had many hurt Toshibas, so
    this was a new problem for me. I figured to fish first before buying parts.

    Cheers, Danny
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-