Maker Pro
Maker Pro

Toshiba 50H82..................

J

john

Jan 1, 1970
0
Jeff...Would you have the Location and Part number handy.
Toshiba here are totally usless...

kip

Thanks so much Jeff............

kip



Most likely it's a bad cap on the hyper module. The module that does the
frame buffering and conversions for different video standards. I've seen
this several times but have just replaced the hyper module. There are
twelve caps of about 20 that I would test. Ones with values between 1 and
50Uf. output from this module is I believe pin 1.
 
Top