Connect with us

toshiba 50h82

Discussion in 'Troubleshooting and Repair' started by ajshoe, Sep 15, 2009.

Scroll to continue with content
  1. ajshoe

    ajshoe

    2
    0
    Sep 13, 2009
    set has burry picture in top section. replaced stk392-110 and 1.8 ohm 2 watt resistors, replaced bad caps in 'tin can', RGB will move in all directions in convergence menu. red raster on top of screen is wavy therfor can't align red in all spots of screen. any suggestions ?
    Set so far had burnt resistor and bad stk392-110. thanks, John
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-