Connect with us

three phase bridge rectifier-Australia

Discussion in 'Hobby Electronics' started by Fonz, Dec 27, 2007.

Scroll to continue with content
  1. Fonz

    Fonz Guest

    G'Day all.
    I was wondering if anyone knew where I could get a three phase bridge
    rectifier in Australia?
    At least 50V, can be 10A or higher.
    I could build one up, but I prefer to have it in a single package.
    To be used for an onboard alternator on a remote control helicopter.
    Many Thanks in advance.
    Happy New Year to all.
    Rob.
    Melbourne.
     
  2. Fonz

    Fonz Guest

    If there aren't any in Australia, does anyone have a suggestion of a
    rectifier diode, >50V, and no lestt that 6A.
    Thannks again.
    Rob.
     
  3. Phil Allison

    Phil Allison Guest

    "Fonz"

    ** Farnell:

    http://au.farnell.com/jsp/Semicondu...IER/26MT100PBF/displayProduct.jsp?sku=9098550


    or RS Components:

    http://www.rsaustralia.com/cgi-bin/...cdkaddmlfjjhedcefeceeldgkidhgn.0&cacheID=auie



    ...... Phil
     
  4. Fonz

    Fonz Guest

    Thanks Phil.
    It always helps if you look in the right places.
    I looked in farnel this morning and only found one, which was discontinued.
    Rob.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-