Connect with us

Thin Push Pull Motor

Discussion in 'Sensors and Actuators' started by NinjaLikeDat, Nov 21, 2015.

Scroll to continue with content
  1. NinjaLikeDat

    NinjaLikeDat

    2
    0
    Nov 21, 2015
    Hello, I'm making a project and need a push pull motor that is very thin (8mm max) and has a good stroke (around 10mm). Could somebody please direct me to the right one.
     
  2. Colin Mitchell

    Colin Mitchell

    1,417
    313
    Aug 31, 2014
    Use a pancake motor.

    Look on ebay for all sorts of motors
     
  3. NinjaLikeDat

    NinjaLikeDat

    2
    0
    Nov 21, 2015
    sorry, but I need a solenoid (should have specified that, sry)
     
  4. Alec_t

    Alec_t

    2,950
    803
    Jul 7, 2015
    10mm stroke is asking a lot for a very small solenoid. What force do you need? Couldn't you use a small geared motor operating a crank/linkage?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-