Connect with us

The Ups and Downs Of The XR2206?

Discussion in 'Electronic Design' started by Ron, Aug 24, 2007.

Scroll to continue with content
  1. Ron

    Ron Guest

    Does anyone know of a way when amplitude modulating the XR2206 IC to
    change the attack and decay rate?

  2. Rich Grise

    Rich Grise Guest

    Use a ramp? Just have your AM voltage follow the attack/decay curve you

    Good Luck!
  3. Ron

    Ron Guest

    I was hoping to use a sine wave to get a siren-like effect.... The
    CD4046 can be frequency modulated that way, but I was hoping the 2206
    could be amplitude modulated like that.

  4. Rich Grise

    Rich Grise Guest

    I looked at the 2206 data sheet, and it seems to have an AM input, which
    is what your original post was about. I didn't bother to look at FM,
    which is what a siren is. So, you put your Siren modulation to the FM
    input, and your attack-decay-sustain-whatever curve into the AM input.

    Good Luck!
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day