Maker Pro
Maker Pro

The smallest LED matrix display available

manmachine

Jan 11, 2010
1
Joined
Jan 11, 2010
Messages
1
Hi Everyone,

I am new to this forum.

I need a LED matrix display which I want to build into the front panel of a very flat equipment. It must not be higher than 0.5 inch, and the optimal size is 7...8 x 100...150 dots. The driving is irrelevant, I use dedicated MCU for it.

The smallest LED display that I found was 0.7 inch tall (5x7 dots). In horizontal position the size is good (0.5 inch) but the 5 dots are not enough. In vertical position the 7 dots is enough but it is too high.

Is there smaller dot matrix diplay? Or is there any LCD solution?

Thank You!
(.. and sorry for my poor English)
 
Top