Connect with us

testing a 2sd1525 darlington ?

Discussion in 'Hobby Electronics' started by mark krawczuk, Sep 7, 2007.

Scroll to continue with content
  1. hi, any body know how to test a 2SD1525 darlington transistor , with a
    digital multimeter ?
    thanks,
    mark k
     
  2. Phil Allison

    Phil Allison Guest

    "mark krawczuk"

    ** See:

    http://www2.toshiba.com/taec/components2/Datasheet_Sync//67/8086.pdf


    See diagram called " Equivalent Circuit" .

    With your DMM on ohms, testing from B to E in either direction should read
    2100 ohms ( +/- 15%).

    With your DMM on " diode test", the C- E diode should tests like any
    silicon diode with a very high resistance ( Mohms) in the reverse direction.

    If all that is OK, the devise is likely OK.

    Unless you bought a fake.



    ........ Phil
     
  3. hi, thanks, mine is buggered, it came outa a fan speed controller from a
    car, in one test it measured something like 35 million ohms, and the otehr
    way 7 million ohms.

    any idea where i can get a replacement , dick smith and jaycar dont have
    anything.
    mark k
     
  4. Phil Allison

    Phil Allison Guest

    "mark krawczuk"

    ** An auto wrecker - for another controller.

    Not even Farnell have a similar part to the 2SD1525.




    ........ Phil
     
  5. Jonno

    Jonno Guest

    Set up a pair as a darlington configuration?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-