Connect with us

Test Clip Micro

Discussion in 'Microcontrollers, Programming and IoT' started by MrWho, Jan 5, 2012.

Scroll to continue with content
  1. MrWho


    Dec 16, 2011
    Hello my Friends...

    I bought Pomona test clips ...[​IMG]
    I guess I have to solder wire to them can I solder it to the middle as showed in the picture ?

    Thank you
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    Nov 17, 2011
    You can, if you keep soldering time very short. Otherwise the plastic will melt and the clip possibly won't work anymore.
    Better yet: get the mating female connectors of the right size, solder wire to the connector and plug the clip into the connector.

  3. GonzoEngineer


    Dec 2, 2011
    If you have a scrap DB25 female connector with soldercup connections, you can take it apart to remove the pins.

    Solder wires to the pins, then cover the whole length of the pin with 1.8" shrink tubing.

    I made a bunch of those almost twenty years ago, and they still work great.:D
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day