Terms in automotive electronics

[Konki]

Hello World,
I am trying to make a device to measure the fuel level in a
scooter. It is fitted with a fuel level sensor and I think I can find
the details. This is not the issue, just the background.
While I was searching for some information regarding automotive
electronics for this project, I came across many articles where the
different cables/signals in automobiles are labelled as Kl15 Kl30 etc.
I now know the meaning of many of these. However, I want to know the
full list of the signals/cables. I searched the web and couldn't find
a reference. Does anybody know which standard defines these names? It
must be defined in some standards as it is apparently widely used
terminology in the automotive electronics industry.
Greetings,
Konki

 

[Anastasios Tsitlakidis]

Konki schrieb:

[...]

While I was searching for some information regarding automotive
electronics for this project, I came across many articles where the
different cables/signals in automobiles are labelled as Kl15 Kl30 etc.
I now know the meaning of many of these. However, I want to know the
full list of the signals/cables. I searched the web and couldn't find
a reference. Does anybody know which standard defines these names? It
must be defined in some standards as it is apparently widely used
terminology in the automotive electronics industry.

I know the standard DIN 72552-2 (German Standard), unfortunately I don't
know the number of the international one.

 

[Jan Homuth]

Konki,
the BOSCH "Kraftfahrtechnisches Handbuch" contains the complete list

and the "Tabellenbuch Kraftfahrtechnik" Holland & Josenhans Verlag Order#
351 ISBN 3-7782-3510-9
pg. 184 ff also lists the signal numbers.

regards
/jan

 

[Konki]

Konki,
the BOSCH "Kraftfahrtechnisches Handbuch" contains the complete list

and the "Tabellenbuch Kraftfahrtechnik" Holland & Josenhans Verlag Order#
351 ISBN 3-7782-3510-9
pg. 184 ff also lists the signal numbers.

Tanks a lot. Any idea if (and where) I can get an English version of
these? I searched the Bosch web site for the firs one and
Springer-Verlag for the second one. No luck. Both sites have no idea
about these. But, I found the second one listed at some German sites
for sale. But, my German is not good enough. :-(

Also, The DIN standard mentioned by Anastasios Tsitlakidis is
avaialble only in German. :-(

Doesn't the SAE or ISO have anything similar?

Greetings,
Konki

 

[Goran Larsson]

Tanks a lot. Any idea if (and where) I can get an English version of
these? I searched the Bosch web site for the firs one and
Springer-Verlag for the second one. No luck.

Is the information on this page enough?

< http://www.type2.com/library/identifi/bosterm.htm >

| From Bosch Automotive Handbook, 3rd edition
|
| Terminal Designations (Excerpts from DIN Standard 72 552)
| The terminal designations ...

 

[Konki]

Is the information on this page enough?
< http://www.type2.com/library/identifi/bosterm.htm >

Yes. Thank you very much. This will do as a reference. In the mean
time, I will try to get a copy of the other publications.

Have a nice day,
Konki