Maker Pro
Maker Pro

Termination block for module

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
Yeah, like Harald noted, it's not a standard connector.
And like AnalogKid noted, Phoenix Contact makes this type of Euro connector.
What you've got is two-each 3 contact connectors and one 2 contact connector that somebody glued together to form a 8 contact connector.
Maybe somebody actually makes something similar, but that's what you've got in your picture.
Check the Phoenix Contact website and see if they have an 8 contact connector like you want, or if you'll have to make due with two 3-contact and a 2-contact set.
Good luck.
 
Top