Connect with us

Terminal Programs and RS232

Discussion in 'General Electronics' started by bf90000, Mar 7, 2005.

Scroll to continue with content
  1. bf90000

    bf90000 Guest

    Hyperterminal will work fine with your PIC so long as you are using
    ASCII. If you'd like to veiw the HEX values, I would reccommend
    using RealTerm. There is really nothing new to learn as it has
    basically the same interface with some added intuitive features.
    This tool has been great for debugging prototypes in my experience
    though I do still use HT from time to time as it has a cleaner look
    for presentations. Converting TTL/CMOS levels is a must. I agree
    that this is likely the problem. Try using a MAX232 chip or a module
    like the one from . I prefer the module for
    prototyping just to have a cleaner more solid feel and max232 for
    finished circuits. Note that ST and SIPEX also make IC's for this
    purpose which might be slightly less expensive. (ST232 and SP232).
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day