Connect with us

Telephone Dialer

Discussion in 'Electronic Design' started by [email protected], Dec 19, 2004.

Scroll to continue with content
  1. Guest


    Do anyone know how to creat a telephone dialer (interface with 2 wires)
    with a DTMF generator?

  2. You're welcome. :)
  3. Rich Grise

    Rich Grise Guest

    You might check some of these links:

    Good Luck!
  4. Josh

    Josh Guest

    There are two ways of doing this, the first which I don't have much
    experience with goes like this. Normally accross a telephone line there's
    50volts, you just stick a bit of resistance between the two wires so the
    voltage drops to a few volts and chuck a signal down it. The other way is to
    stick a transformer accross it (with a resistance on it's coils enough to
    drop the voltage to a few volts) and stick your signal on the other side.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day