Maker Pro
Maker Pro

Tektronix AM503 current amplifier

J

johnbscot

Jan 1, 1970
0
Can anyone please email to me a copy of the AM503 current amplifier
manual.

It is not on the TEK website.

Many thanks

John

[email protected]
 
W

Winfield Hill

Jan 1, 1970
0
johnbscot wrote...
Can anyone please email to me a copy of the AM503
current amplifier manual.

It is not on the TEK website.

I have an electronic copy, but it's only 74 pages
long and I wonder if it's complete. email me at
work, and on Monday I'll check against the real
manual and add anything that's missing.
 
J

johnbscot

Jan 1, 1970
0
Winfield said:
johnbscot wrote...

I have an electronic copy, but it's only 74 pages
long and I wonder if it's complete. email me at
work, and on Monday I'll check against the real
manual and add anything that's missing.

Hi,

if you could email me the file that you have I would appreciate it.

Many thanks

John
John Ballantyne
Qteknology Ltd

Vagabond House
1 Union Street
Markinch
Fife
KY7 6AD

01592 611982
07949 271331
 
M

Michael A. Terrell

Jan 1, 1970
0
johnbscot said:
Hi,

thanks for the link, but I have tried to get the manual from that site
with no success.

The file is not available.

Any other sites where I might get the manual?

Regards

John



Did you try the mirror site? It has a lot more bandwidth and allows
more simultaneous users. The link is on the main site.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
J

johnbscot

Jan 1, 1970
0
Michael said:
Did you try the mirror site? It has a lot more bandwidth and allows
more simultaneous users. The link is on the main site.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

Hi,

many thanks for that.

I tried both the main site and the mirror site yesterday with no luck,
but today it did work!

It may be as you say bandwidth.

Many thanks to all!!


John
 
M

Michael A. Terrell

Jan 1, 1970
0
johnbscot said:
Hi,

many thanks for that.

I tried both the main site and the mirror site yesterday with no luck,
but today it did work!

It may be as you say bandwidth.

Many thanks to all!!

John



It is a very active site. Sometimes it takes a week. The best time
is in the middle of the night.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
J

John Woodgate

Jan 1, 1970
0
dated Mon said:
It is a very active site. Sometimes it takes a week. The best time
is in the middle of the night.

There IS no 'middle of the night' on the web. Just like the British
Empire, the sun never sets on it.
 
T

Terry Given

Jan 1, 1970
0
John said:
There IS no 'middle of the night' on the web. Just like the British
Empire, the sun never sets on it.

Bwahahahahaha! Says a former colonial.

I guess it just means that the empire faded away in broad daylight :)

Cheers
Terry
 
M

martin griffith

Jan 1, 1970
0
Bwahahahahaha! Says a former colonial.

I guess it just means that the empire faded away in broad daylight :)

Cheers
Terry
A bit like the US is doing now?

BTW what is the US national debt at the moment?


martin
 
J

Jim Thompson

Jan 1, 1970
0
A bit like the US is doing now?

BTW what is the US national debt at the moment?


martin

More than you can afford ;-)

Why is it Europeons throw straw in the air when it's they who are
LOSERS ?

Whatsa matter baby Martin, sewage smell causing you to hallucinate
?:)

...Jim Thompson
 
M

Michael A. Terrell

Jan 1, 1970
0
John said:
There IS no 'middle of the night' on the web. Just like the British
Empire, the sun never sets on it.


Yeah, right.


BAMA a US site and most users are in the US so there is a night
time. The site owner even suggests after midnight as a good time. The
site was originally intended to archive manuals and schematics for old
tube type ham radio equipment, but over time a lot of test equipment was
added. Also, at one time there was a place to request a manual that
wasn't on the site.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 
M

martin griffith

Jan 1, 1970
0
More than you can afford ;-)

Why is it Europeons throw straw in the air when it's they who are
LOSERS ?

Whatsa matter baby Martin, sewage smell causing you to hallucinate
?:),

...Jim Thompson

OK, lets put it this way
Deep DooDoo, note the negative sign.
United States $ -829,100,000,000 2005 est.
Also from
https://www.cia.gov/cia/publications/factbook/rankorder/2187rank.html
China $ 160,800,000,000 2005 est.
Germany $ 115,500,000,000 2005 est.
Saudi Arabia $ 90,730,000,000 2005 est.
Russia $ 84,250,000,000 2005 est.
Switzerland $ 58,240,000,000 2005 est.
Norway $ 49,490,000,000 2005 est.
Netherlands $ 39,950,000,000 2005 est.

You are an ex-empire, just like the UK, and Spain, the yUKs did it
better and longer than you, and hid corruption better than your
mediocre system, ( It's called knighthoods)

Thank Buddah we taught the Indian continent well, I dont mean the one
you stole
I reckon India will beat China in the long run :)



martin
 
J

Jim Thompson

Jan 1, 1970
0
OK, lets put it this way
Deep DooDoo, note the negative sign.
United States $ -829,100,000,000 2005 est.
Also from
https://www.cia.gov/cia/publications/factbook/rankorder/2187rank.html
China $ 160,800,000,000 2005 est.
Germany $ 115,500,000,000 2005 est.
Saudi Arabia $ 90,730,000,000 2005 est.
Russia $ 84,250,000,000 2005 est.
Switzerland $ 58,240,000,000 2005 est.
Norway $ 49,490,000,000 2005 est.
Netherlands $ 39,950,000,000 2005 est.

You are an ex-empire, just like the UK, and Spain, the yUKs did it
better and longer than you, and hid corruption better than your
mediocre system, ( It's called knighthoods)

Thank Buddah we taught the Indian continent well, I dont mean the one
you stole
I reckon India will beat China in the long run :)



martin

Woopeedoo! Who will you turn to for help when the Islamists start
whipping your ass? Which is why I pray for a Democrat majority.
They'll sit by and let you die while they "negotiate" for "peace in
our time" ;-)

...Jim Thompson
 
M

martin griffith

Jan 1, 1970
0
Woopeedoo! Who will you turn to for help when the Islamists start
whipping your ass? Which is why I pray for a Democrat majority.
They'll sit by and let you die while they "negotiate" for "peace in
our time" ;-)

...Jim Thompson


Woopeedoo! Who will you turn to for help when the fundamentalist
christians start whipping your ass?

zzz time, drawn swords at 7am?



martin
 
J

Jim Thompson

Jan 1, 1970
0
Woopeedoo! Who will you turn to for help when the fundamentalist
christians start whipping your ass?

zzz time, drawn swords at 7am?



martin

There aren't enough fundamentalist Christians in the US to do much
more than make noise, and they sure as hell can't handle a gun.

7AM MST? What's that? About 3PM your time?

...Jim Thompson
 
M

martin griffith

Jan 1, 1970
0
There aren't enough fundamentalist Christians in the US to do much
more than make noise, and they sure as hell can't handle a gun.

7AM MST? What's that? About 3PM your time?

...Jim Thompson
Ok lets compromise, say we shoot at dawn :)


martin
 
M

martin griffith

Jan 1, 1970
0
Ok lets compromise, say we shoot at dawn :)


martin
oops! done an upgrade from drawn swords, to guns, mainly to prevent N.
Korea firing a pre-empitve stike


martin
 
J

Jim Yanik

Jan 1, 1970
0
Yeah, right.


BAMA a US site and most users are in the US so there is a night
time. The site owner even suggests after midnight as a good time. The
site was originally intended to archive manuals and schematics for old
tube type ham radio equipment, but over time a lot of test equipment was
added. Also, at one time there was a place to request a manual that
wasn't on the site.

I just got a email from a UK gent who downloaded a lengthy 2213 manual(pdf)
and it didn't even have the power supply schematic,one of the MOST
necessary diagrams. Unfortunately,I do not have a scanner to digitize mine.

Anybody have a readable digital 2213/15 PS schematic or link to one?
 
Top