Connect with us

Tektronix 2235 Oscilloscope Problem/Repair

Reply to Thread

Discussion in 'Troubleshooting and Repair' started by kota_rt, Sep 12, 2008.

Scroll to continue with content
  1. Sep 12, 2008 #1
    kota_rt

    kota_rt

    1
    0
    Sep 12, 2008
    I have just acquired a 2235 Option 01 Oscilloscope that has the following problem....
    The scope displays the entire trace on just a small portion of the screen.
    The horizontal Adjust can move the entire trace off of the screen to the left, but when adjusted to the right the trace stops just before the 6th graticule. When the horizontal Adjust is moved further to the right the trace is compressed into a vertical line just before the 6th graticule.
    Has anyone else experienced this problem?
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Tektronix 2235 Oscilloscope Troubles

  2. Tektronix 2235

  3. Tektronix 2235 troubleshooting.

  4. Tektronix 2235 Scope

  5. Tektronix 2235 scope power supply problem

  6. Tektronix 2235 reduced horizontal sweep

  7. Tektronix TDS540 Oscilloscope

  8. Tektronix 475 Oscilloscope

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-