Connect with us

tek 465

Discussion in 'Troubleshooting and Repair' started by tiruperumal, Mar 23, 2013.

Scroll to continue with content
  1. tiruperumal

    tiruperumal

    1
    0
    Mar 23, 2013
    I got a tek 465.ch 1 & ch2 work only in xy position.Vertical and horizontal position control works in both channels.Time base section I think is faulty.Please guide me to fix it.Thank you.Tiru.
     
  2. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,250
    2,703
    Jan 21, 2010
    I'm sure you'll get a better reply soon, but a common answer to this is to look in a forum for TEK users. Apparently there is one that provides a lot of troubleshooting and repair/help and is also obviously dedicated to these units.
     
  3. davenn

    davenn Moderator

    13,381
    1,784
    Sep 5, 2009
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-