Maker Pro
Maker Pro

Teak tv model CT-M4895 how to store programs please.

J

Jim Lazzaro

Jan 1, 1970
0
I have obtained this second hand tv and I dont know how to set memory
so that on switch off and then on, the last channel being viewed is
back again.
The tv has the following buttons from left: "Mode" "PP" "STORE"
"CLEAR".
Example of the problem is: when setting say channel 9 to my desired
colour level and brightness etc. it looks okai but when I turn off
and on the tv goes to channel 1.
Thanks
 
P

Pussynuts

Jan 1, 1970
0
Jim you need to get hold of the remote control for this Tv.Tuning is done
from the remote control.
Cheers
Joe
 
J

Jim Lazzaro

Jan 1, 1970
0
Thanks Joe for the info. I hope one of those multi remotes will do the trick.
Jim
 
M

mo

Jan 1, 1970
0
I have obtained this second hand tv and I dont know how to set memory
so that on switch off and then on, the last channel being viewed is
back again.
The tv has the following buttons from left: "Mode" "PP" "STORE"
"CLEAR".
Example of the problem is: when setting say channel 9 to my desired
colour level and brightness etc. it looks okai but when I turn off
and on the tv goes to channel 1.
Thanks

This TV always starts on channel 1.Engineering design.
For the Memory settings,try STORE-PP-STORE.
If no good you need a remote with the PP button.
 
R

Russell Griffiths

Jan 1, 1970
0
Jim.
I had a similar problem with a Samsung some time ago and asked for
help in the group.

I was told the following:-

"Most models Press store then pp on remote then store again."

I think this may work on some Teac too.

Hope this helps.
Russell Griffiths.
 
J

Jim Lazzaro

Jan 1, 1970
0
This TV always starts on channel 1.Engineering design.
For the Memory settings,try STORE-PP-STORE.
If no good you need a remote with the PP button.

What? Is it true that this TV always starts on channel 1, even if
correctly tuned with a remote?
I am very curious about thisone.
Jim
 
E

Eric

Jan 1, 1970
0
By the way it is not "Channel" it should be called "Program"
You press the "program" up or down button to change from one tv station to
another.


I have obtained this second hand tv and I dont know how to set memory
so that on switch off and then on, the last channel being viewed is
back again.
The tv has the following buttons from left: "Mode" "PP" "STORE"
"CLEAR".
Example of the problem is: when setting say channel 9 to my desired
colour level and brightness etc. it looks okai but when I turn off
and on the tv goes to channel 1.
Thanks
 
P

Pussynuts

Jan 1, 1970
0
It will only start on channel 1 if the power is completley removed.If
powering up from standby it will start on the previous selected channel.
Cheers
Joe
 
E

Eric

Jan 1, 1970
0
Program 1 or Channel 1, I think it would be program 1



It will only start on channel 1 if the power is completley removed.If
powering up from standby it will start on the previous selected channel.
Cheers
Joe
 
Top