Connect with us

TEAC LCHD2040 default reset

Discussion in 'Troubleshooting and Repair' started by OldTechnocrat, May 10, 2013.

Scroll to continue with content
  1. OldTechnocrat

    OldTechnocrat

    2
    0
    Dec 2, 2012
    I have recovered a TEAC LCHD2040 TV by replacing the caps in the power supply however the set will not detect DTV channel two and variants. Autotune scans from 64Mhz to beyond 600Mhz smoothly. I suspect they have been locked out. I would like to reset the software to factory defaults but cannot find out how. I have the instruction manual [on the net through AWA] but no mention of factory default software. I do not have a remote. I would appreciate any help.

    Thanks OT:cool:
     
  2. OldTechnocrat

    OldTechnocrat

    2
    0
    Dec 2, 2012
    The set is Flat Screen - Analogue ONLY

    Seems others have the same dilema as there were no comments posted.
    I widened my search and found a YouTube video describing the set: nothing in the operating manual, nothing on the web but one pearl in this video: The set is ANALOGUE only. The only flat screen I have seen without digital demodulation.
    Problem solved.:D
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-