Connect with us

Teac CT-M340MKII TV standby fault

Discussion in 'Hobby Electronics' started by Mick, Apr 4, 2004.

Scroll to continue with content
  1. Mick

    Mick Guest

    I have a Teac CT-M340MKII TV which will switch on fine but after pressing
    the channel buttons it switches it self back to standby and the way to turn
    it on again is by switching it on and off at the master switch.
    Has anybody seen this fault before or is a common thing for this model.
    All help would be appreciated.

    Mick
     
  2. Normally, those have problems with power supply. I would change
    electrolitics in the PS primary first, as they cause too many problems.

    Apart from that it sound like you have EEPROM problem or some buttons on
    front panel are leaky.

    Rudolf
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-