Connect with us

TEAC Carousel 5 Disc CD Player PD_D600

Reply to Thread

Discussion in 'Troubleshooting and Repair' started by RANDALL HILL, Feb 10, 2016.

Scroll to continue with content
  1. Feb 10, 2016 #1
    RANDALL HILL

    RANDALL HILL

    1
    0
    Feb 10, 2016
    I have a TEAC PD-D600 carousel multi compact disc player that was working fine,then it was left used for a couple of years in my office. When I attempted to use it, the carousel rotated several times & displayed the following on the screen.
    1 2 3 4 5 DISC 1EE
    Now it wont eject the carousel to be loaded. I took the housing off to see if the problem would be obvious, but it's not. I'm not sure if this unit is worth my having it looked at by a technician, or if I should just write it off.Any suggestions are welcome.
    Thank you all,
    Randall L.
    [email protected]
     
  2. Feb 10, 2016 #2
    dorke

    dorke

    2,342
    665
    Jun 20, 2015
    Welcome to EP,

    You should look for the rubber-belt that opens and closes the tray.
    It is very common that they dry out with time and fail(either get to loose or snap).
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CD Player Won't read disc

  2. Philips Laser Disc Player Vlp600

  3. CD player read problem

  4. SA VK72D panasonic 5 disc stero is stuck at disc change

  5. CD Player Faulty - says "no disk"

  6. Kodak Carousel 760H Projector

  7. How to check 5 pf or 1.5 pf disc capacitor

  8. Pioneer PD-M423 cd player stops playing

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-