Connect with us

Taser Proof Vest?

Discussion in 'Electronic Basics' started by Anna Banana, Mar 5, 2006.

Scroll to continue with content
  1. Anna Banana

    Anna Banana Guest

    What kind of vest could protect someone from a Taser?

    I was thinking a simple foil-faced fabric might be adequate.

    Thanks,
    Anna
     
  2. Christopher

    Christopher Guest

    Hello Anna,



    An emergency metallic solar blanket or a quick vest made of the silver
    mylar that those fancy balloons or kites use.

    I have seen a mylar kite stretched across power lines take down the
    entire block serviced by that utility pole. It created a gawd awful
    deafening concussion of a 60 hz hum sound.

    A vest could also be made out of aluminum window screen.

    This experiment would be better tested on your little brother. lol


    * * *
    Christopher

    Temecula CA.USA
    http://www.oldtemecula.com
     
  3. Jamie

    Jamie Guest

    why? planning on a possible police
    chase as your running away?
     
  4. CLFE

    CLFE Guest

    I'm betting they're a troll - but just for the sake of argument:

    So, he/she wants a "Taser proof vest? Ok...... let him have one (once
    created). Better put a bullet proof jacket on too - because if they see a
    Taser isn't doing anything, the bullet may be their next option. Ooopps -
    the cops don't always shoot for the area covererd by a vest - so that may be
    useless. Good luck in his/her crime spree - short lived as it may be.
     
  5. John  Larkin

    John Larkin Guest

    That should work. The foil will short out the zot, although the
    needles will still puncture you. And when the cops realize you're
    taser-proof, they'll just shoot you.

    John
     
  6. Make a vest out of several layers of kevlar sail cloth.

    R
     
  7. On second thoughts stitch some aluminium foil between the kevlar.

    R
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-