Connect with us

TAPPER LINE CONDITIONER

Discussion in 'Electronic Design' started by GrandPaBobby, Dec 28, 2005.

  1. GrandPaBobby

    GrandPaBobby Guest

    I recently purchased an old Topaz 1000 VA line conditioner transformer.
    Basically, these units are 1:1 isolation transformers with some
    secondary taps to allow compensation for fluctuations in primary line
    voltage or secondary load. There is some kind of voltage sensing
    circuit driving a number of triacs connected to the tap points.

    Mine seems stuck on a lower voltage tap connection. I have seen
    conceptual schematics for these things but would like to see a working
    schematic. I would be willing to pay for same. This thing weighs about
    60 lbs so shipping it out for repairs might be prohibitive.

    GrandPaBobby
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-