Maker Pro
Maker Pro

Tape Switch

Ed Rawley

Aug 30, 2016
1
Joined
Aug 30, 2016
Messages
1
I was wondering if anyone has run into one of these little pressure switches and where I can find them. These "switches" are mounted on a toggle switch and command movement on a piece of medical equipment. The only marking that are on the tape are 0.7 P1.5, I am not sure if that stands for a value or if that is nothing more than a makers mark for a date code. Please see attached pictures of what I am refering to. Thanks in advance for all your help.Front Angle Tape Switch.jpg Backt Tape Switch.jpg
 
Top