Connect with us

SX-1000TW

Discussion in 'Power Electronics' started by Johnkelly, May 23, 2021.

Scroll to continue with content
  1. Johnkelly

    Johnkelly

    2
    0
    May 23, 2021
    I am currently recapping an sx-1000tw and cannot locate caps (c3, 4, c5, 6). I found them on the schematic but can't locate them on the receiver. They are by the control amp on the schematic. If someone could tell me their locations it would be greatly appreciated.
    Thanks in advance.
     

    Attached Files:

  2. Martaine2005

    Martaine2005

    3,408
    926
    May 12, 2015
    Hi, Is it possible somebody was in there before you?
    Maybe put film caps in?

    Martin
     
  3. Johnkelly

    Johnkelly

    2
    0
    May 23, 2021
    Thanks for the reply. Unfortunately, they do not have a designated board location.
     
  4. Martaine2005

    Martaine2005

    3,408
    926
    May 12, 2015
    Ah ok, have a good look on the switches or near the switches.
    I can't see the schematic too well. It wont enlarge without blurring.

    Martin
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-