Maker Pro
Maker Pro

switching digital compass output

mohd9011

Mar 30, 2013
12
Joined
Mar 30, 2013
Messages
12
hi

i have an digital compass and i want to make the output direction as an input to my chip instead of going to the screen.
is there is any possible way to do this?

thanks
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
not without lots more info from you

what sort of digital compass?
what sort of signal is it outputting ?
what is the chip you are wanting to feed that signal into ?

Dave
 

mohd9011

Mar 30, 2013
12
Joined
Mar 30, 2013
Messages
12
what sort of digital compass?
something like this one
http://www.amazon.com/Wayfinder-All-Terrain-Marine-Digital-Compass/dp/B00005KAPW/

what sort of signal is it outputting ?
i want to take the output and instead of/in addition to displaying my direction to the 8-led screen i reuse it as input for my chip

what is the chip you are wanting to feed that signal into ?

i wrote a program to will calculate the ship direction according to the current coordinates and direction coordinates and i want it to read both the compass reading to check if its direction is right or not
also it will read the gps reading to recalculate its direction every specific interval of time to increase the accuracy of the voyage line

thanks for the help
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
you didnt answer the last 2 questions///

what sort of signal is it outputting ?

what is the chip you are wanting to feed that signal into ?


try again :)

Dave
 
Top