Connect with us

Switching between Series & Parallel

Discussion in 'Electrical Engineering' started by Terry Olsen, May 12, 2007.

Scroll to continue with content
  1. Terry Olsen

    Terry Olsen Guest

    I have two 12v motors and one 12v battery.

    I need to switch these motors between series & parallel. I'm hoping I can do
    it with a DPDT switch but I can't seem to figure out how to wire it. Can
    anyone point me to a wiring diagram for this?

    Thanks.
     
  2. Terry Olsen

    Terry Olsen Guest

    Thanks. I switched from electronics to computer programming back in 2000 and
    it seems that i've forgotten how to think trons...
     
  3. ehsjr

    ehsjr Guest



    + -----+---[Motor1]---+
    | |
    +----o o-----+----o o
    \ \
    o com o com
    | |
    +-------+ |
    | |
    Gnd ---+---[Motor2]---+ |
    | |
    | |
    +---------------------+

    Shown in parallel. Flip switch to right for series.

    Ed
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-